|
Product Details:
|
| Standard: | Din30670 | Material: | Gr.b St37 Ss400 St52 Gr.50 X42 X52 |
|---|---|---|---|
| Length: | 6-15 Meter | OD: | 33-3000mm |
| Wt: | 2mm-25mm | Coating Thickness: | 2.0mm-5.0mm |
| Application: | Corrosion Protection Of Steel Pipes And Fittings | Packing: | Standard Export Packing |
| High Light: | Dn500 Anti Corrosion Steel Pipe,25mm steel boiler tube,3lpp Anti Corrosion Steel Pipe |
||
3lpe Or 3lpp Dn500 Dn600 Dn700 Dn300 Dn400 Dn800 Anti Corrosion Steel Pipe
Brief Introduction
1. The coating systems described in this standard are not intended for use on pipe that will be bent after the coating or lining system has been applied.
2. Coating and lining systems. The coating and lining systems may consist of any of the following three types, a two‑part, chemically cured epoxy primer and one or more coats of a different two‑part, chemically cured epoxy topcoat; two or more coats of the same two‑part, chemically cured epoxy coating, in which case the first coat shall be considered as the prime coat; a single coat of a two‑part, chemically cured epoxy coating. Maximum temperature.
3. AWWA steel pipe coating standards are based on the maximum service temperature of water. The purchaser shall consult the coating manufacturer for conditions and limitations.
Specification
| Standard: | Din30670 |
| Length: | 6-15 Meter |
| Wt: | 2mm-25mm |
| Application: | Corrosion Protection Of Steel Pipes And Fittings |
| Material: | Gr.b St37 Ss400 St52 Gr.50 X42 X52 |
| OD: | 33-3000mm |
| Coating Thickness: | 2.0mm-5.0mm |
| Packing: | Standard Export Packing |
Contact Person: Jim
Tel: +8613785724901
