ISO9001 H Section Angle Beam Steel Astm En10025 S355

H Section Steel En10025 Standard S235 S355 Ss400 Construction Structural Steel

Brief Introduction

 H-beam in all directions has the advantages of strong bending ability, simple construction, cost saving and light weight structure, has been widely used. An economic section shaped similar to the capital Latin letter H, also known as universal steel beam, wide flange (edge) I-beam or parallel flange I-beam.The cross section of H beam usually includes two parts, the web and the flange, also known as the waist and the side.

The inner and outer flanges of H-beam are parallel or nearly parallel, and the end of the flanges is at a right Angle, hence the name "parallel flange I-beam".H-beam web thickness is smaller than the same high webs of ordinary I-steel, flange width is larger than the same high webs of ordinary I-steel, so it is also named wide edge I-steel.Depending on the shape, the section modulus, moment of inertia and the corresponding strength of H-beam are obviously better than that of ordinary I-beam with the same single weight.

Specification

Because the inside and outside of the flange are parallel and the edge ends are at right angles, it is easy to assemble and assemble into various components, thus saving about 25% of the welding and riveting workload, greatly speeding up the construction speed and shortening the construction period.

Because of the above advantages, H-beam is widely used in: various civil and industrial building structures;A variety of large-span industrial plants and modern high-rise buildings, especially in areas with frequent seismic activity and high-temperature working conditions of industrial plants; Large Bridges with large bearing capacity, good section stability and large span are required.Heavy equipment; Expressway; Ship skeleton; Mine support; Foundation treatment and embankment works; Various machine components.